Vector HTI

I.D. Sawing Fluid

VECTOR HTI is a synthetic formulation developed for use in “once-through” processes using I.D. diamond blades. With its exceptional heat transfer capability, VECTOR HTI quickly cools the diamond blade for longer diamond life, while the product’s superior detergency keeps the diamond interface clean and free cutting for both increased cutting speed and reduced blade deflection. A next generation version of this product has been developed which offers improved performance. For more information see VECTOR HTI-1.1. Benefits: • Extended blade life • Increased production • Lowest sub-surface damage • Less bow and warp • Reduced blade deflection • Elimination of exit chipping • Elimination of substrate tear • Cleaner machines and working conditions Keep it but push 1.1 which has more detergency and carries away swarf better

Vector HTI Details

Base Material:


Shelf Life:

24 Months


Product is available in 5-gallon pails and 55-gallon drums.


Gallium Arsenide, Germanium, Sapphire, Silicon, Silicon Carbide

Similar Products

Vector HTAVector HTGVector HTA-D2Vector HTI-1.1
Base Material WaterWaterWaterWater
Specific Gravity1.
Category - Grinding and Slicing

Handling Instructions

VECTOR HTI is designed for use at very high dilution ratios. It is typically evaluated at a ratio of 400 parts water to 1 part product (.25%). Since the dilution ratio is so high, water quality plays an important role in the performance of the fluid make-up. Deionized (DI) water works best because of the elimination of ion interference with the surfactant base. Softened or fairly normal tap water will also perform adequately if the quality does not fluctuate.

We recommend that dilution ratios be maintained with a conductivity meter and a pH meter. For consistent results, develop production-specific scales by obtaining accurately measured samples of a properly diluted mixture that corresponds to use. Use this product in “once-through” systems only.


Product should be stored in a temperature controlled environment. Prolonged exposure to temperatures at or below 32° Fahrenheit (0°C) is discouraged. Prolonged exposure to temperatures at or above 100° Fahrenheit (38°C) is also discouraged. In addition, material should always be sealed when not in use to prevent evaporation.


Dispose of in accordance with all applicable local regulations.

Contact Information

Fill out this form and we will get back to you with information regarding our products.