Inserts

DF200 Disks for use in IPTA Technology

Eminess Inserts are designed exclusively for use with the IPTA waxless fixutring technology. Developed on Dow's DF200 film, the inserts can be quickly replaced in the IPTA pockets as they are worn out. This ensures a minimum amount of downtime, maximizing throughput of polished wafers.

Inserts Details

Base Material:

Poromeric

Shelf Life:

No Expiration

Packaging:

Fixtures are packaged face-to-face (polish side to polish side) and sealed inside a plastic bag to ensure cleanliness during transportation. The bags are taped to the side of the box to prevent the bag from slipping and damaging the pads. Fixtures should always remain flat. Bending fixtures during handling can cause wrinkles in the PSA and premature delamination of the release liner.

Applications:

Silicon

Similar Products

Suba™ Lite
Base Material Felt
Backing Film Compressibility
Compressibility
Thickness

Complementary Products

  • IPTA2

    Waxless Fixturing for High Volume Production

  • IPTA3

    Waxless Fixturing for High Volume Production

Category - Polishing Fixtures

Handling Instructions

Care should be taken to ensure that inserts are not bent or creased prior to use.

Storage

Product should be stored and transported in the original packaging. The product should be stored in temperatures between 10°C to 24°C (50°F to 75°F) and <50% humidity. Exposure for six (6) months or less to conditions between -17°C to 48°C (0°F and 120°F) and/or at relative humidity of up to 100% will not impact the product performance as long as the release liner remains intact and attached to the PSA. If the product is exposed to temperatures and humidity outside the recommended conditions, it may still be acceptable for use. In all cases, the product should be allowed to return to normal room temperatures prior to use.

Disposal

Dispose of in accordance with all applicable local regulations.

Contact Information

Fill out this form and we will get back to you with information regarding our products.


×