Challenge 555-HT

Slurry Additive for Suspending Non-Treated Abrasives (Recirculating)

CHALLENGE 555-HT was developed for use in “high-speed recirculating” and “high-speed once-through” slurry pumping systems. Utilizing the energy of a high speed circulating pump, standard on most lapping machines, it evenly disperses aluminum oxide, cerium oxide, silicon carbide, boron carbide, and garnet abrasive. It also reduces abrasive usage by eliminating “hard-packing” and waste. Benefits: • No scratching • Less sub-surface damage • No hard-packing • Less abrasive waste • Increased removal rate • Easier post-lap cleaning • Non-corrosive to machine

Challenge 555-HT Details

Base Material:


Shelf Life:

24 Months


Product is available in 5-gallon pails and 55-gallon drums.


Ceramic, Fused Silica, Glass, Poly Carbonate lens

Similar Products

Challenge 543-HTChallenge 540HTChallenge 550-HT
Base Material WaterWaterWater
Category - Lapping Additives

Handling Instructions

CHALLENGE 555-HT is used at approximately 5% (by volume) with deionized (DI) water or tap water. After CHALLENGE 550-HT is mixed with the water in the slurry tank, add the abrasive. The slurry will be ready for use almost immediately. Start grain loading 400 g/liter for a one-meter machine. Flow rate for the slurry should be approximately 300ml/minute for a one-meter machine.


Product should be stored in a temperature controlled environment. Prolonged exposure to temperatures at or below 32° Fahrenheit (0°C) is discouraged. Prolonged exposure to temperatures at or above 100° Fahrenheit (38°C) is also discouraged. In addition, material should always be sealed when not in use to prevent evaporation.


Dispose of in accordance with all applicable local regulations.

Contact Information

Fill out this form and we will get back to you with information regarding our products.