	Home
+	Semi-Conductor Chemical Mechanical Planarization (CMP)
	Interlayer Dielectric (ILD)
	Shallow Trench Isolation (STI)
	Tungsten
	Copper
	Polysilicon
	Platinum
+	Specialty Substrate CMP Polishing
	Nickel Iron NiFe
	Nickel Iron Cobalt NiFeCo
	Quartz SiO2
	Sapphire Al2O3
	Gallium Arsenide GaAs
	Gallium Antimonide GaSb
	Gallium Nitride GaN
	Indium Phosphide InP
	Indium Gallium Phosphide InGaP
	Lithium Niobate LiNbO3
	Lithium Tantalate LiTaO3
	Aluminum Nitride AlN
	Silicon Germanium SiG
	Silicon Carbide SiC
	Yttrium Aluminum Garnet YAG
+	Magneto-Resistive Device Polishing
	Nickel Iron NiFe, Nickel Iron Cobalt NiFeCo
+	NEW Products
	EMINESS Specialty Substrate Slurries
+	Ultra-Sol™ Slurries
	Ultra-Sol™ Ceria Slurries
	Ultra-Sol™ Silica Slurries
	Ultra-Sol™ Zirconia Slurries
	Ultra-Sol™ Alumina Slurries
	Ultra-Sol™ Fiber Optics Slurries
	Ultra-Sol™ Diamond Suspensions
+	Polishing Systems
	Glass Polishing Systems
	Optical Polishing: Colloidal Silica
	Optical Polishing: Colloidal Alumina
	Fiber Optic Polishing System
	Specialty Slurries
	Ultra-Lox™ Powders
	Site Map

Products by Application

Polishing Target Material	Stock/Intermediate		Final Polish		Comments
Polishing Target Material	Eminess Pad	Eminess Slurry	Eminess Pad	Eminess Slurry	Comments
Acrylic	GS Suba 500 Suba X	Alox GE/A Ultra Grit	Suba 500 Suba X Politex	Alox CR SAP	Alumina particles greater than 2 microns typically recommended for stock/intermediate removal. For surface finish requirements exceeding optically clear, a customized solution may be required.
Aluminum	Suba X	Alloy Advantage	Politex Suba X	Alox CR	The low pH of our aluminum suspensions is vital to achieving good finish and removal rates.
Beryllium	IC1000 MH Suba 500	Alloy Advantage High Shine	Politex SPM 3100	Resinox
Cadmium Zinc Telluride	IC1000 MH	High Shine Resinox	Politex SPM 3100	Particle-free chemistry	Traditional methods started with aluminum suspensions and finished with straight chemistry. Newer methods have replaced the aluminum with colloidal silica, and modified the final chemstries as well.
Calcium Fluoride	IC1000 MH Suba IV	Zero Ra Alloy Advantage	Suba IV Politex	Alox CR	Cerium Oxide provides a chemical reaction to boost removal rates during the intermediate step.
Ceramic	Steel/Composite Plate	Silicon Carbide Prime Gem Alloy Advantage	Suba 550 Suba X Politex	Mohs 9 Resinox Resinox Enhanced	An embossed pad at final polish may improve slurry transfer and removal rates.
Copper	IC1000	Alloy Advantage Eternal 2362	Politex SPM3100	Resinox Rodel CUS1351
Fused Silica, BK7	Suba 500	Resinox Resinox Enhanced	Politex SPM3100	Resinox Resinox Enhanced
Gallium Arsenide	IC1000 Suba 500	Mohs 9 Resinox	OPC6350 Politex	Particle-free chemistry	Adding diluted bleach at intermedate step may improve removal rates.
Germanium	IC1000 Suba IV	Mohs 9 w/Bleach	Politex SPM3100	Resinox w/Bleach	As a harder material, the Mohs 9 colloidal silica works well. Diluted bleach may be added during both intermediate and final steps to improve removal rates.
Glass	Steel/Composite Plate Suba IV	Silicon Carbide Alox CR High Shine	GS Politex	Zero Ra Zero Ra Pure	There are many types of glass being polished in the market, call us to determine which polish is right for you.
Indium Phosphide	IC1000 Suba 500	Mohs 9 Resinox	OPC6350 Politex	Particle-free chemistry	As a harder material, the Mohs 9 colloidal silica works well. Diluted bleach may be added during both intermediate and final steps to improve removal rates.
Lithium Niobate	Suba 500 Suba 1200 MH	Resinox Resinox Enhanced	Politex SPM3100 OPC6350	Resinox Resinox Enhanced	As a relatively hard material, colloidal silica products work well but require long process times.
Lithium Tantalate	Suba 500 Suba 1200 MH	Resinox Resinox Enhanced	Politex SPM3100 OPC6350	Resinox Resinox Enhanced	As a relatively hard material, colloidal silica products work well but require long process times.
Nickel / Iron Alloys	Suba X	Alloy Advantage	Politex Suba X	Alox CR	The low pH of our aluminum suspensions is vital to achieving good finish and removal rates.
Oxide	IC1000	Resinox	Politex SPM3100	Resinox
Polysilicon	IC1000	Resinox Klebosol 1498-50	IC1000 Politex	Resinox Klebosol 1498-50
Quartz	GS Suba IV	Zero Ra	OPC6350 Politex	Zero Ra Resinox Enhanced	Recommended slurry will vary largely on whether pitch or pads are utilized.
Sapphire	IC1000 MH	Prime Gem Boron Carbide	MH Suba H2 IC1000	Mohs 9 Resinox	A very hard material for which the Mohs 9 colloidal silica was designed. IC1000 pads provide maximum performance, while MH and Suba H2 offer larger pad sizes at more competitive prices.
Silicon	Suba 500	Resinox	Politex SPM3100	Resinox	Industry standard products used worldwide for stock removal and final polish.
Silicon Carbide	IC1000 Suba	Prime Gem Boron Carbide Ultra-Sol SiC14	IC1000 Suba	Mohs 9 Resinox	An extremely hard material, polish times can be very long. Bleach can be added during any step to improve removal rates.
Stainless Steel or Chrome	MH Suba 500	Alloy Advantage	Suba X MH	Alloy Advantage	The low pH of our aluminum suspensions is vital to achieving good finish and removal rates.
Tungsten	IC1000 Suba 500	Alloy Advantage MSW1500	IC1000 Suba 500	Alloy Advantage MSW1500
Yttrium Aluminum Garnet (YAG)	MH IC1000 Suba 550	Prime Gem Boron Carbide Alox CR	Suba IV Politex	High Shine Mohs 9	As a harder material, the Mohs 9 colloidal silica works well. Diluted bleach may be added during both intermediate and final steps to improve removal rates.
Zerodur	Suba 500 Suba X IC1000	Resinox	Politex	Zero Ra Resinox Enhanced	Recommended slurry will vary largely on whether pitch or pads are utilized.
Zinc Selenide	IC1000 Suba X	Resinox Enhanced High Shine	Politex OPC6350	High Shine

FOR CUSTOM REQUESTS, PRICING, OR ORDERING INFORMATION

CALL 1-888-899-1942


Home About Us Contact Us Terms And Conditions