Aluminum Oxide Dressing Stick

Non-aggressive ID Blade Cleaning and Conditioning Sticks

Semiconductor Materials, Inc (SMI) recommends that ID Slicing Blades be conditioned regularly to remove the buildup of sludge and epoxy, and also correct uneven diamond wear. The least aggressive dressing stick for ID blades, aluminum is used for cleaning the diamond surfaces on all Mark III and Mark IV SMI I.D. blades. It will not remove the diamond structure. The dressing sticks are commonly available in 1"x1"x6" and 0.5"x0.5"x6" sizes.

Aluminum Oxide Dressing Stick Details

Base Material:

Aluminum Oxide

Shelf Life:

No Expiration

Packaging:

SMI dressing sticks are sold and packaged individually. Larger orders will be boxed.

Complementary Products

Category - Conditioners

Handling Instructions

SMI recommends a periodic dressing be performed to keep the diamond surface free from build-up during normal slicing operations. This procedure should be performed periodically at every 50 slices approximately 3-5 cuts with the aluminum oxide dressing stick. This method is performed by plunge-cut (fixture mount only) at 50% reduced operating speeds.

Storage

Dressing sticks require no special storage consideration.

Disposal

Dispose of in accordance with all applicable local regulations.

Contact Information

Fill out this form and we will get back to you with information regarding our products.


×